Find an item in our store 

Categories

Parts Search
________________

Hot Deals
Pool Cleaners
Suction Cleaners
Robotic Cleaners
Above Ground Cleaners
Hand Held Cleaners
Pool Vacuums
Pool Pumps
Booster Pumps
Pool Motors
Sump Pumps
Parts & Accessories
Pool Filters
DE Filters
Sand Filters
Cartridge Filters
Cartridges & Grids
Filter Valves
Solar Covers
Solar Reels
Heaters Gas
Heat Pumps
Spa Heaters
Solar Heaters
Heater Accessories
6” Pool Tile
Glass Tile
Hand Holds
Mosaic Tiles
Trim Tile - Matte or Glaze
Trim Tile - Skid Resist
Mosaics - Standard Lines
Natural Stone
Lion Heads
Eco-Friendly Equipment
Light & Controls
Salt Systems
Misc. Supplies
Test Kits
Pool Finishes
AquaGuard

AquaGuard Protective Coatings

AquaGuard 5000 Protective Coating
AquaGuard 5000 is a high performance, 100% solids, epoxy Phenolic resin with proprietary alkali curing agents. Reinforced with proprietary additives for physical strength.

Aquatic Technologies products not only restores everlasting beauty to your pool, it makes your pool easier to maintain and clean. Since AquaGuard 5000 is non-porous, algae cannot penetrate the surface and most water or chemical stains can be easily removed. This means less maintenance, less chemical usage, and less time and money cleaning your pool.

Protective Coatings – Required 2-3 Coats – 1 Unit will require 600-700 Sq. Ft.

 

 

Buy AquaGuard

AquaGuard Colors

AquaGuard Protective Sealer

AquaGuard Protective Sealer
This is a two-component system: First you apply one coat of AquaGuard protective sealer. Wait a minimum of 24 hours for pool refinishing sealer to thoroughly to dry. Complete pool resurfacing by applying 3 coats of AquaGuard 5000 protective coating. Requires 1 coat. One unit covers from 600 - 700 ft, depending upon the porosity of the concrete. Performance Benefits:
  • Roll-on application
  • Easy to apply
  • Thick, durable wear-resistant finish
  • Excellent bond strength
  • Smooth non-porous finish
  • No Fiberglass cloth required
  • Strengthens concrete and seals leaks
  • AquaGuard 5000 Provides Years of Beauty and Protection
Protective Sealer – Wait a minimum of 6-24 Hours, and then apply 2-3 coats of AquaGuard 5000. Price: $360.00
 

Buy AquaGuard

AquaGuard Plus Protective Coating

Pool Refinishing Made Easy with AquaGuard® Plus
AquaGuard® 5000 Plus is simply the strongest pool system in the world. It is a shell within a shell using F.R.P. (Fiberglass Reinforced Polymers). The product is FDA approved and even has a 15-year warranty against defects. It is unlike anything out there in terms of a pool refinishing system. The coating it provides is 10 times stronger than concrete. Like you’d expect with an AquaGuard® product, it is completely water tight. It has the extra flexibility to grip whatever cracks, crevices and imperfections exist in the original surface. It goes places and does things that no other pool resurfacing product can.

High performance, 100% solids, epoxy Phenolic resin with proprietary alkali curing agents. Reinforced with proprietary additives for physical strength.

(VOC Compliant)

 

 

Buy AquaGuard

Pool Area Calculator
Available Colors
Price: $420.00

AquaGuard colars

AquaGuard Protective Sealer

Buy AquaGuard

AquaGuard Plus Primer / Sealer
AG Plus is a 100% solids epoxy primer. Two-component system; Resin and Hardener. AquaGuard Plus is a very low viscosity, solvent free epoxy resin-curing agent based on the new light colored breakthrough in phenalkamine technology. Designed especially for 100% solid coatings has an excellent balance of cure speed and pot life, which enables coatings to be applied with conventional roll on equipment and provide an increased application window for the heavy-duty protective coatings industry.

Apply 1st coat with corning 1 and 1 half once Fiberglass matting-Soak Thoroughly – Covers 150 Sq. Ft. per Unit. Let Dry 12-24 hours, then apply 3 coats AquaGuard 5000® Protective Coatings.

  • Roll-on application
  • Easy to apply
  • Thick, durable wear-resistant finish
  • Excellent bond strength
  • Smooth non-porous finish
  • No Fiberglass cloth required
  • Strengthens concrete and seals leaks
  • AquaGuard 5000 Provides Years of Beauty and Protection 

Price: $360.00

 

 

AquaGuard Car Wash Protective Coating

AquaGuard Car Wash Protective Coating
AquaGuard 5000® car wash coating is exactly what your car wash system needs. Car wash tunnels face challenges that no other environment faces. Damage from water, mildew, algae, fungi, chemicals, soaps and moisture are normal issues for car wash tunnels. Traditional waterproofing products simply can’t withstand such conditions.

AquaGuard 5000® is applied in a continuous coating to effectively seal the surfaces of the car wash, while eliminating any chance of water getting into it. You will be amazed with the professional, attractive look that comes with an AquaGuard 5000® coating Finish. It is easy to clean and maintain and is made to outlast other waterproofing products.

High performance, 100% solids, epoxy Phenolic resin with proprietary alkali curing agents. Reinforced with proprietary additives for physical strength.

Requires 2-3 coats – 1 Unit will provide approx. 600-700 Sq. Ft. or single Spray Application. VOC Compliant.

Pool Area Calculator
Available Colors


Price: $380.00

 

Buy AquaGuard

AquaGuard Car Wash Protective Sealer

AquaGuard Car Wash Primer / Sealer
Description: AG CW is 100% solids epoxy primer. Two-component system; Resin and Hardener. AquaGuard CW is a very low viscosity, solvent free epoxy resin-curing agent based on the new light colored breakthrough in phenalkamine technology. Designed especially for 100% solid coatings has an excellent balance of cure speed and pot life, which enables coatings to be applied with conventional Roll on Equipment and provide an increased application window for the heavy-duty protective coatings industry. Moisture Tolerant.
  • Roll-on application
  • Easy to apply
  • Thick, durable wear-resistant finish
  • Excellent bond strength
  • Smooth non-porous finish
  • No Fiberglass cloth required
  • Strengthens concrete and seals leaks
  • AquaGuard 5000 Provides Years of Beauty and Protection 

Price: $360.00

 

Buy AquaGuard

AquaGuard Basement Protective Sealer

Buy AquaGuard

AquaGuard Basement Protective Coating
An effective basement sealer coating is a must for anyone with a basement. Basements new and old are often damp and drafty. Because they are always exposed to moisture from the ground, they often deteriorate more quickly than other parts of the house. In fact, it is hard to even make a basement look good, as paint doesn’t bond well to concrete. However, AquaGuard® Basement Coating soaks into the concrete of your basement floor and walls and expands in order to create a moisture-proof barrier that also looks good.

AquaGuard® created their basement coating based on our 34 years of experience in pool coatings. If it can stand up to the harsh chemicals and constant exposure to water in a pool, it can also do a great job sealing a basement. AquaGuard® basement coating is the best in basement waterproofing and reinforcing.

High performance, 100% solids, epoxy Phenolic resin with proprietary alkali curing agents. Reinforced with proprietary additives for physical strength.

Requires 2-3 Roll Coats – 1 Unit will provide approx. 600-700 Sq. Ft. or a single spray Application. VOC Compliant.

Pool Area Calculator
Available Colors


Price: $380.00

 

AquaGaurd Protective Sealer

Buy AquaGuard

AquaGuard Basement Primer / Sealer
AG BP is 100% solids epoxy primer. Two-component system; Resin and Hardener. AquaGuard BP is a very low viscosity, solvent free epoxy resin-curing agent based on the new light colored breakthrough in phenalkamine technology. Designed especially for 100% solid coatings has an excellent balance of cure speed and pot life, which enables coatings to be applied with conventional Roll on Equipment and provide an increased application window for the heavy-duty protective coatings industry. Moisture Tolerant.
  • Roll-on application
  • Easy to apply
  • Thick, durable wear-resistant finish
  • Excellent bond strength
  • Smooth non-porous finish
  • No Fiberglass cloth required
  • Strengthens concrete and seals leaks
  • AquaGuard 5000 Provides Years of Beauty and Protection 

Price: $360.00

   

AquaGuard Patch Kit

Buy AquaGuard

AquaGuard 5000 Patch Kit
High performance 100% solid epoxy phenolic curing agents, reinforced with proprietary thickeners additives for physical strength. A filler for voids, repairs, under cut tile lines,returns outlets, hooks and setting new drains.

One quart system 2:1 mixing ratio with applicator tool.

Price: $75.00

 

 

 

Home | Pool Store | Pool Cleaners | Pool Filters | Pool Heaters | Pool Lighting | Pool Pump | Pool Resurfacing | Pool Supplies
Pool Refinishing | Pool Area Calculator | Tips | News | Videos | Testimonials | Contact Us | Privacy Policy | Terms & Conditions

© 2004 - 2011 All Rights Reserved. Pool Bright Supplies Website Design by EPSIT, Inc.